1Hz - 2MHz Function Generator with XR2206

1Hz - 2MHz Function Generator Kit with XR2206



  1Hz - 2MHz Function Generator with XR2206 Component List:

XR2206 - Function Generator IC
Function Generator PCB
RCA Gold Plated Connector
SW1 - 4-DIP Switch
SW2 (Sine / Triangle) / Square Switch
SW2 Sine / Triangle Switch
1x 3-PIN Gold Plated Male Header
2x 2-PIN Gold Plated Male Header
P1 - 100K Potentiometer (Frequency Coarse)
P2 - 50K Potentiometer (Frequency Fine)
P3 - 100K Potentiometer (Amplitude)
1x 100uF Audio Capacitor
2x 10uF Audio Capacitor
2x 100nF Capacitor
1x 1nF Capacitor
1x 150pF Capacitor
3x 6.8K 1% Metal Film Resistor
2x 1K 1% Metal Film Resistor

  Technical Specifications:

Voltage Supply: 9-18V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm + 10%
Frequency: 1Hz - 2MHz

SINE WAVE
Amplitude: 0 - 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: +0.05dB 1Hz - 100kHz

SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)

TRIANGLE WAVE
Amplitude: 0 - 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA



1Hz - 2MHz Function Generator with XR2206 schematic



1Hz - 2MHz Function Generator with XR2206
 

Premium quality XR2206 Function Generator kit capable of producing high quality sine, square and triangle waveforms of high-stability and accuracy. The output waveforms can be both amplitude and frequency modulated. Coarse frequency adjustment is accomplished using 4-DIP switch for the following four frequency ranges; (1) 1Hz-100Hz, (2) 100Hz-20KHz, (3) 20KHz-1MHz, (4) 150KHz-2MHz. Frequency output can be fine tuned using P1 and P2 potentiometers. 1Hz - 2MHz XR2206 Function Generator kit includes premium quality components, including Audio Grade Gold Capacitors, Gold Plated RCA Connector, WIMA Capacitors, 1% Metal Film Resistors and premium quality PCB with red solder mask.



Function Generator Adjustments

 

P1 – Coarse Frequency Adjustment
P2 – Fine Frequency Adjustment
P3 – Sine / Triangle Wave Amplitude Control (0 - 3V at 9V DC input)
SW1 – Coarse Frequency Adjustment (only one switch must be in ON position at a time)
SW2 – Sine / Square Waveform Selection
S3 – Sine / Triangle Waveform Selection (SW2 must be switched to Sine)



PCB Layout

 

Function Generator with XR2206 PCB 1Hz - 2MHz



Displaying Output Frequency on LCD

 


Function Generator Kit with XR2206 1Hz - 2MHz

XR2206 Function Generator kit includes output that can be directly connected to 60MHz Counter kit for measuring and displaying output frequency on LCD display. 60MHz Frequency Meter / Counter measures frequency from 10Hz to 60MHz with 10Hz resolution. It is a useful bench test equipment for testing and finding out unknown frequency of various devices such as oscillators, radio receivers, transmitters, function generators, crystals, etc. The meter provides very stable readings and has excellent input sensitivity thanks to onboard amplifier and TTL converter. It can even measure weak signals from crystal oscillators. With the addition of prescaller it is possible to measure frequency of 1GHz and above. Please see the link to learn more about 60MHz Frequency Meter / Counter.



1Hz - 2MHz Function Generator with XR2206 Kit

 


Function Generator Kit with XR2206 1Hz - 2MHz

You can purchase a complete premium quality 1Hz - 2MHz Function Generator Kit or components such as XR2206 IC or PCB at Electronics-DIY store. Please see the link for more details.


Related Links





Accurate LC Meter Capacitance Inductance Meter with 16F628 and LCD
Volt Ampere Meter with 16F876 Microcontroller and LCD display
 
Accurate LC Meter

Build your own Accurate LC Meter (Capacitance Inductance Meter) and start making your own coils and inductors. This LC Meter allows to measure incredibly small inductances making it perfect tool for making all types of RF coils and inductors. LC Meter can measure inductances starting from 10nH - 1000nH, 1uH - 1000uH, 1mH - 100mH and capacitances from 0.1pF up to 900nF. The circuit includes an auto ranging as well as reset switch and produces very accurate and stable readings.
PIC Volt Ampere Meter

Volt Ampere Meter measures voltage of 0-70V or 0-500V with 100mV resolution and current consumption 0-10A or more with 10mA resolution. The meter is a perfect addition to any power supply, battery chargers and other electronic projects where voltage and current must be monitored. The meter uses PIC16F876A microcontroller with 16x2 backlighted LCD.

50MHz 60MHz Frequency Meter / Counter with 16F628 & LCD
1Hz - 2MHz XR2206 Function Generator
60MHz Frequency Meter / Counter

Frequency Meter / Counter measures frequency from 10Hz to 60MHz with 10Hz resolution. It is a very useful bench test equipment for testing and finding out the frequency of various devices with unknown frequency such as oscillators, radio receivers, transmitters, function generators, crystals, etc.
1Hz - 2MHz XR2206 Function Generator

1Hz - 2MHz XR2206 Function Generator produces high quality sine, square and triangle waveforms of high-stability and accuracy. The output waveforms can be both amplitude and frequency modulated. Output of 1Hz - 2MHz XR2206 Function Generator can be connected directly to 60MHz Counter for setting precise frequency output.

BA1404 HI-FI Stereo FM Transmitter
USB IO Board PIC18F2455 / PIC18F2550
BA1404 HI-FI Stereo FM Transmitter

Be "On Air" with your own radio station! BA1404 HI-FI Stereo FM Transmitter broadcasts high quality stereo signal in 88MHz - 108MHz FM band. It can be connected to any type of stereo audio source such as iPod, Computer, Laptop, CD Player, Walkman, Television, Satellite Receiver, Tape Deck or other stereo system to transmit stereo sound with excellent clarity throughout your home, office, yard or camp ground.
USB IO Board

USB IO Board is a tiny spectacular little development board / parallel port replacement featuring PIC18F2455/PIC18F2550 microcontroller. USB IO Board is compatible with Windows / Mac OSX / Linux computers. When attached to Windows IO board will show up as RS232 COM port. You can control 16 individual microcontroller I/O pins by sending simple serial commands. USB IO Board is self-powered by USB port and can provide up to 500mA for electronic projects. USB IO Board is breadboard compatible.

RF Remote Control 433MHz Four Channel
100m 4-Channel 433MHz Wireless RF Remote Control
 
200m 4-Channel 433MHz Wireless RF Remote Control

Having the ability to control various appliances inside or outside of your house wirelessly is a huge convenience, and can make your life much easier and fun. RF remote control provides long range of up to 200m / 650ft and can find many uses for controlling different devices, and it works even through the walls. You can control lights, fans, AC system, computer, printer, amplifier, robots, garage door, security systems, motor-driven curtains, motorized window blinds, door locks, sprinklers, motorized projection screens and anything else you can think of.
100m 4-Channel 433MHz Wireless RF Remote Control

Four button RF remote is used to turn ON / OFF four different devices independently. Any of the four outputs can be configured to work independently in either toggle or momentary mode. Outputs are buffered by BC549 NPN transistors and can drive low voltage devices directly or be connected to either 5V or 12V relays (or motors) to control appliances that use 110V / 220V mains voltage or any voltage of your choice. Multiple remote systems can be used independently to control more than four appliances in the same location by changing the address code on 433MHz receiver and remote. It is also possible to use several remotes to control the same appliance such as garage door.
 

Electronics-DIY.com © 2002-2014. All Rights Reserved.