FREE SHIPPING ON ALL ORDERS OVER $99

USB Voltmeter Kit
USB Voltmeter Kit
USB Voltmeter is a PC based dual channel voltmeter built around PIC18F2550 microcontroller that measures voltage from 0.00V up to 500.00V with 10mV resolution. USB Voltmeter sends measured data to PC via standard USB connection displaying data on a computer monitor. USB Voltmeter is self-powered drawing very little current from USB port. Voltage readings are displayed via included USB Voltmeter software.

Specifications
     Voltage Input Range: 0 - 500V
     Voltage Input Channels: 2
     Voltage Resolution: 10mV
     Power Supply: 5V (USB Powered)
     PCB Dimensions: 18mm x 59mm / 0.7" x 2.3"

Component List
   1x PIC18F2550 Programmed Microcontroller (MCU)
   1x USB Voltmeter PCB
   1x 28-DIP IC Socket
   1x USB Type B Connector
   1x Gold Plated 12-PIN Male Header
   1x Gold Plated 8-PIN Male Header
   1x 20MHz Crystal Resonator
   2x 100K 1% Metal Film Resistor
   2x 10K Micro Resistor
   2x 6.8K 1% Metal Film Resistor
   2x 1K 1% Metal Film Resistor
   1x 100uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
   1x USB Voltmeter software (Win 10, 8, 7, XP, VISTA)
Larger Quantities?
Get Quote
Price: $29.95
In Stock: YES
Quantity:


USB IO Board Stick Kit
USB IO Board Stick Kit
USB IO Board Stick is a tiny spectacular input / output development board / parallel port replacement that can be used to control many different devices via USB port. It may also be used for data acquisition such as collecting data from sensors, buttons, voltage/current measurements, etc. It plugs right into computer's USB port so no USB cable is required. USB IO Board Stick is based around single PIC18F2550 microcontroller chip that includes    10x 10-bit Analog to Digital Converters (ADC) for precision voltage/current measurements. Controlling USB IO Board Stick is easy. When attached to Windows PC the board will show as RS232 COM serial port. You can control 16 individual microcontroller I/O pins by sending simple serial commands via included software or use included source code to write your own custom C#/VB.NET application. USB IO Board Stick is self-powered by USB port and can provide up to 500mA for your project needs and it is breadboard compatible. Simply solder included 12-PIN & 8-PIN male headers on the bottom side of the PCB and the board can be plugged into a breadboard for quick prototyping. USB IO Board Stick is compatible with Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux.

These are examples of what can be built using USB IO Board Stick:
     USB Relay Controller (turn ON/OFF lights or appliances in the house)
     Control LEDs, toys, electronic gadgets, wireless control, etc.
     USB LCD Controller
     USB Volt / Ampere / Wattage / Pressure Meter
     USB CNC Controller
     USB Data Logger
     USB Temperature Meter / Logger
     USB Thermostat
     USB Humidity Meter / Logger
     USB Digital RF Power Meter
     USB Stepper Motor Controller
     USB RC Servo Controller
     and much more

Specifications
     16 I/O PINs
     10 x 10-bit ADC ports for precision voltage measurements
     USB 3.0, 2.0 and USB 1.1 plug-and-play compatibility
     USB Powered
     Compatible with Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux
     Low 5mA current consumption
     PCB Dimensions: 18mm x 60mm / 0.7" x 2.25"

Click here for schematic, pictures and sample software

Component List
   1x PIC18F2550 Programmed Microcontroller
   1x USB IO Board Stick PCB
   1x 28-DIP IC Socket
   1x USB Male Type A Connector
   1x Gold Plated 12-PIN LCD Male Header
   1x Gold Plated 8-PIN LCD Male Header
   1x 20MHz Crystal Resonator
   2x 10K Resistor
   1x 47uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
Larger Quantities?
Get Quote
Price: $24.95
In Stock: YES
Quantity:


USB IO Board Kit
USB IO Board Kit
USB IO Board is a tiny spectacular input / output development board (parallel port replacement) that can be used for controlling many different devices as well as data acquisition such as collecting data from sensors, buttons, voltage/current measurements, etc. It is based around single PIC18F2550 microcontroller chip that includes    10x 10-bit Analog to Digital Converters (ADC) for precision voltage/current measurements. Controlling USB IO Board is easy. When attached to Windows PC USB IO Board will show up as RS232 COM serial port. You can control 16 individual microcontroller I/O pins by sending simple serial commands or write your own custom C#/VB.NET application. USB IO Board is self-powered by USB port and can provide up to 500mA for your project needs. USB IO Board is breadboard compatible. Simply solder included 12-PIN & 8-PIN male headers on the bottom side of the PCB and the board can be plugged into a breadboard for quick prototyping. USB IO Board is compatible with Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux.



These are examples of what can be built using USB IO Board Pro:
     USB Relay Controller (turn ON/OFF lights or appliances in the house)
     Control LEDs, toys, electronic gadgets, wireless control, etc.
     USB LCD Controller
     USB Volt / Ampere / Wattage / Pressure Meter
     USB CNC Controller
     USB Data Logger
     USB Temperature Meter / Logger
     USB Thermostat
     USB Humidity Meter / Logger
     USB Digital RF Power Meter
     USB Stepper Motor Controller
     USB RC Servo Controller
     and much more

Specifications
     16 I/O PINs
     10 x 10-bit ADCs for precision measurements
     USB 2.0 and USB 1.1 plug-and-play compatibility
     USB Powered
     Runs under Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux
     Low 5mA current consumption
     PCB Dimensions: 18mm x 59mm / 0.7" x 2.3"

Click here for schematic, pictures and sample software

Component List
   1x PIC18F2550 Programmed Microcontroller (MCU)
   1x USB IO Board PCB
   1x 28-DIP IC Socket
   1x USB Type B Connector
   1x Gold Plated 12-PIN LCD Male Header
   1x Gold Plated 8-PIN LCD Male Header
   1x 20MHz Crystal Resonator
   2x 10K Resistor
   1x 100uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
Larger Quantities?
Get Quote
Price: $24.95
In Stock: YES
Quantity:


USB Relay Controller
USB Relay Controller
Control up to eight devices with your computer using this USB relay controller board. Comes with Relay Controller software to control your devices from a PC. 12V relays are not included.

Specifications
     Voltage Supply: 12V
     PCB Dimensions: 18mm x 59mm / 0.7" x 2.3"

USB relay controller

Component List
   1x PIC18F2550 Programmed Microcontroller (MCU)
   1x USB Relay Controller PCB
   1x 28-DIP IC Socket
   1x USB Type B Connector
   1x Gold Plated 12-PIN LCD Male Header
   1x Gold Plated 8-PIN LCD Male Header
   1x 20MHz Crystal Resonator
   8x BC549 Transistor
   8x 1K Resistor
   2x 10K Resistor
   1x 100uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
   1x USB Relay Controller software (Win 10, 8, 7, XP, VISTA)

Relays are not included.
Larger Quantities?
Get Quote
Price: $29.95
In Stock: YES
Quantity:


USB Thermometer Kit with Data Logger
USB Thermometer Kit with Data Logger
USB Thermometer allows to measure temperature in two different locations. Two Microchip MCP9700 temperature sensors in standard TO-92 package are used to sample temperature and allow to measure temperature from -40 to +125 Celsius degrees. Simply connect to a PC computer via standard USB cable and temperature readings will be displayed using included USB Thermometer software. USB Thermometer takes power directly from USB port and does not need external power supply. Temperature readings can be displayed in both Fahrenheit and Celsius degrees.

USB Thermometer software comes with Data Logger feature. Date, time and temperature readings are saved to a text file and can be used to create various graphs via Microsoft Excel or any other statistical software. The software will log temperature every x amount of time which can be set from a second up to a day.





Specifications
     Temperature Range: -40 to +125 degrees Celsius
     Voltage Supply: 5V (USB Powered)
     PCB Dimensions: 18mm x 59mm / 0.7" x 2.3"

Component List
   1x PIC18F2550 Programmed Microcontroller (MCU)
   2x MCP9700 temperature sensors (TO-92 package)
   1x USB Thermometer PCB
   1x 28-DIP IC Socket
   1x USB Type A Connector
   1x Gold Plated 12-PIN LCD Male Header
   1x Gold Plated 8-PIN LCD Male Header
   1x 20MHz Crystal Resonator
   2x 10K Resistor
   1x 47uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
   1x USB Thermometer software with Data Logger (Win 10, 8, 7, XP, VISTA)
Larger Quantities?
Get Quote
Price: $29.95
In Stock: YES
Quantity:


EasyDriver Stepper Motor Driver
EasyDriver Stepper Motor Driver
The EasyDriver is a simple to use bipolar stepper motor driver that supports microstepping. It can be used to control 3-axis CNCs, robots, home appliances, etc. It's compatible with any source that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder 3/5V pads). Board is powered by 7V to 30V supply to power stepper motors with any voltage. It has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got a precision motor control. EasyDriver drives bipolar motors, and motors wired as bipolar. I.e. 4, 6, or 8 wire stepper motors.

This is the newest version of EasyDriver V4.4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.
Note: Do not connect or disconnect a motor while the driver is energized. This may cause permanent damage to the A3967 IC.

Features
     A3967 Precision Microstepping Driver
     MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
     Compatible with 4, 6, and 8 wire bipolar stepper motors such as popular NEMA 17
     Adjustable current control from 150mA/phase to 750mA/phase
     Compatible with Arduino GRBL G-code interpreter for driving 3-axis CNC machines
     Breadboard compatible pins
     Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds

Larger Quantities?
Get Quote
Price: $4.95
In Stock: YES
Quantity:



      

Electronics-DIY.com © 2002-2017. All Rights Reserved.