FREE SHIPPING ON ALL ORDERS OVER $99

USB IO Board Stick Kit

USB IO Board Stick is a tiny spectacular input / output development board / parallel port replacement that can be used to control many different devices via USB port. It may also be used for data acquisition such as collecting data from sensors, buttons, voltage/current measurements, etc. It plugs right into computer's USB port so no USB cable is required. USB IO Board Stick is based around single PIC18F2550 microcontroller chip that includes    10x 10-bit Analog to Digital Converters (ADC) for precision voltage/current measurements. Controlling USB IO Board Stick is easy. When attached to Windows PC the board will show as RS232 COM serial port. You can control 16 individual microcontroller I/O pins by sending simple serial commands via included software or use included source code to write your own custom C#/VB.NET application. USB IO Board Stick is self-powered by USB port and can provide up to 500mA for your project needs and it is breadboard compatible. Simply solder included 12-PIN & 8-PIN male headers on the bottom side of the PCB and the board can be plugged into a breadboard for quick prototyping. USB IO Board Stick is compatible with Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux.

These are examples of what can be built using USB IO Board Stick:
     USB Relay Controller (turn ON/OFF lights or appliances in the house)
     Control LEDs, toys, electronic gadgets, wireless control, etc.
     USB LCD Controller
     USB Volt / Ampere / Wattage / Pressure Meter
     USB CNC Controller
     USB Data Logger
     USB Temperature Meter / Logger
     USB Thermostat
     USB Humidity Meter / Logger
     USB Digital RF Power Meter
     USB Stepper Motor Controller
     USB RC Servo Controller
     and much more

Specifications
     16 I/O PINs
     10 x 10-bit ADC ports for precision voltage measurements
     USB 3.0, 2.0 and USB 1.1 plug-and-play compatibility
     USB Powered
     Compatible with Windows 10, 8, 7 (32/64-bit), XP, VISTA, Win2K, Mac OSX and Linux
     Low 5mA current consumption
     PCB Dimensions: 18mm x 60mm / 0.7" x 2.25"

Click here for schematic, pictures and sample software

Component List
   1x PIC18F2550 Programmed Microcontroller
   1x USB IO Board Stick PCB
   1x 28-DIP IC Socket
   1x USB Male Type A Connector
   1x Gold Plated 12-PIN LCD Male Header
   1x Gold Plated 8-PIN LCD Male Header
   1x 20MHz Crystal Resonator
   2x 10K Resistor
   1x 47uF Panasonic Capacitor
   2x 100nF Multilayer Ceramic Capacitor
   1x Instructions with Schematic
Larger Quantities?
Get Quote
Price: $24.95
In Stock: YES
Quantity:



      

Electronics-DIY.com © 2002-2017. All Rights Reserved.