Arduino Prototype Kit
Arduino Prototype is a tiny arduino development board fully compatible with Arduino Pro. It's breadboard compatible so it can be plugged into a breadboard for quick prototyping. It has VCC & GND power pins available on both sides of PCB. It's small, power efficient, yet customizable through onboard 2 x 7 perfboard that can be used for connecting various sensors and connectors. Arduino Prototype uses all standard through-hole components for easy construction, two of which are hidden underneath IC socket. Board features 28-PIN DIP IC socket, user replaceable ATMEGA328 microcontroller flashed with Arduino bootloader, 16MHz crystal resonator and a reset switch. It has 14 digital input/output pins (0-13) of which 6 can be used as PWM outputs and 6 analog inputs (A0-A5). Arduino sketches are uploaded through any USB-Serial adapter connected to 6-PIN ICSP female header. Board is supplied by 2-5V voltage and may be powered by a battery such as Lithium Ion cell, two AA cells, external power supply or USB power adapter.
Specifications
 100% compatible with Arduino IDE (Tools > Board > Arduino Pro (5V, 16MHz) w/ ATMEGA328)
Microcontroller: ATMEGA328
Low Power Consumption
Operating Voltage: 2 - 5V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
Flash Memory: 32KB of which 2 KB is used by Arduino bootloader
SRAM: 2 KB
EEPROM: 1 KB
PCB Dimensions: 18mm x 50mm
Component List
1x ATMEGA328 microcontroller programmed with Arduino Bootloader
1x Arduino Prototype PCB
1x 28-DIP IC Socket
1x 16MHz Crystal Resonator
1x Tactile Switch
1x Gold Plated 6-PIN Female Header
1x Gold Plated 14-PIN Male Header
1x Gold Plated 7-PIN Male Header
1x Gold Plated 6-PIN Male Header
1x Gold Plated 4-PIN Male Header
1x 10K Micro Resistor
1x 47uF Capacitor
2x 100nF Capacitors
1x Instructions with Schematic
Related Products
USB to Serial Arduino Programmer |
|
FREE